Friday, May 08, 2009

Cisco 877 Router Configuration by SDM Express

For Cisco 877 Router installation is very easy with SDMExpress mode. (I don't mention with Cisco SDM and CLI).
1. Assign the Username and Password for Router
2. Assign the Lan IP address (e.g: ip address-192.168.1.254, subnet mask-255.255.255.0)
3. Assign the Wan Interface
  • Encapsulation : PPPoA(AAL5SNAP)
  • VPI: 0, VCI:100
  • Address type: Ip Negotiated
  • Authentication Type : PAP
Fill the UserName and Password for Dynamic Link
4. If you want to Enable DHCP, just click enable and assign IP address.
5. Enable NAT
6. Enable Default Route by Dialer0 interface
7. Apply Changes.

Pls take note: If not working Encapsulation type PPPoA and Authentication PAP, try with other PPPoE and Authentication Type CHAP.

For more detail: find Attachment file. http://www.mediafire.com/?lyumzjxdnjz

No comments: